The 995 Hinge Jamb Router combines our high-speed jamb mortising and hinge installation with the additional flexibility to machine 6’8” to 7’0” jambs with three hinges and 8’0” jambs with four hinges.
The 995 is equipped with the Kval Four-Shooter Screw gun–supported by ball bearing equipped steel wheels–mounted on an overhead track precisely aligned to ensure the hinge is properly positioned into the pocket at each hinge location. The 995 also includes special chip out blocks that reduce tear out on the edge of the jamb and align the hinge in the mortised pocket at each hinge location.
To attach 4” × 4” hinges to the jamb screws are automatically sorted and fed four at a time to the screw gun. The operator manually places the hinge onto a magnetic indexing fixture then rolls and pivots the Four-Shooter into the “H” block at each hinge location to attach the hinges.
The 995 is also equipped with a Pre-Drill System for Four-Shooter. Either twelve pilot holes or sixteen pilot holes are drilled simultaneously and hinge pockets are blown clean of any excess sawdust within four seconds following the hinge pocket routing sequence for hinge screw mounting holes.